Product Information
WiFi Texas WT-GPOE-1-AB
Gigabit Single, Mode AB port PoE Injector with no power supply
Power an IP camera, desktop phone, WiFi access point, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from a DC power source (power supply sold separately) and adds it to your Ethernet data cable (Cat5, Cat5e, Cat6) to your device.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
Specifications
Specifications WT-GPOE-1-AB
| Certifications | N/A |
| Data + PoE Ports | 1 |
| Data Ports | 1 |
| Data Rate | Gigabit |
| Dimensions | 1x1x4 in. |
| LEDs Per Port | 1 |
| Management Port | None |
| Max. Amps Per Port | 1.25 |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| PoE Configurable Per Port | No |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8) |
| PoE Standard | 802.3af |
| Power Input | 2.1mm DC x2 |
| Weight | 10oz |