WiFi Texas RJ45 y-cable for PoE

WiFi Texas WT-MMF-RJ45

RJ45 Combiner/Splitter Kit - Use one Ethernet cable for two devices.

• RJ45 Combiner / Splitter kit carries two data lines on one Cat 5e/6 cable to two remote devices
• Uses two Switch ports for one Combiner, and Splitter separates the signal at the device end
• Supports 10/100 data rates for each circuit
• Supports Mode A power only (1,2,3,6)
• Allows PoE with 802.3af or 802.3at supported (up to 60 watts possible if used with the WT-AT-4)

Important Notes:

• Each connected device requires a separate router/switch port
• only 10/100 is supported over 2 pairs according to Ethernet standards
• The WiFi-Texas brand supports 802.3af PoE applications
• Complatible with injectors and switches that use Mode A for power (is not compatible with our passive mode B injectors)

Specifications for dual LAN use:

• Long run connection 1 x 8P/8C RJ45 Female
• Device/Switch Connector: 2 x 4P/4C RJ45 Male
• Cable Rating: Cat 5e
• Max Speed Rating: 100Mb
• 25 watts per circuit if CAT-6 is used

uPoE usage:

• Use with the WT-AT-4 or WT-AT-8 devices to provide 60 watts of power
• Combines two 802.3at ports into one uPoE port
• Max Speed Rating: 100Mb in uPoE usage
• Requires two ports on the PoE side of the WT-AT-4 device
• No splitter required at the remote device

Package Contents

• 2 x RJ45 Combiner/Splitter