The Biggest Mistakes to Avoid When Deploying Fixed Wireless
Fixed Wireless Access can be an effective way to deliver broadband without the construction requirements associated with running fiber directly to every customer.
But a successful wireless deployment requires more than installing radios and turning them on.
Many network problems can be traced back to decisions made during the planning stage.
Here are some of the most common mistakes to avoid.
1. Designing Around Coverage Instead of Capacity
Getting a signal to a location doesn't necessarily mean you have a network that can serve that location well.
Operators need to understand how many customers an access point can realistically support and how much traffic those customers are likely to generate.
Capacity planning should account for peak demand, not just average usage.
2. Ignoring the Physical Environment
Maps don't always tell the whole story.
Trees, buildings, terrain, elevation changes, and other obstructions can significantly affect wireless performance.
A site that looks perfect on a map may have problems once the actual radio path is evaluated.
Proper site surveys and link planning can identify these issues before equipment is installed.
3. Treating Backhaul as an Afterthought
The wireless access network is only one part of the system.
If an access point is capable of delivering substantial bandwidth but the connection feeding that site is undersized, the backhaul becomes the bottleneck.
As subscriber numbers increase, backhaul capacity needs to increase with them.
4. Not Planning for Future Growth
A network should not be designed only around today's customers.
Subscriber demand tends to increase over time.
Operators should consider where additional customers will come from, how much additional bandwidth they will consume, and whether the tower, spectrum, backhaul, power, and access equipment can accommodate that growth.
Planning for expansion early can save significant money later.
5. Overlooking Interference
Wireless networks share the air.
Interference can affect throughput, reliability, and overall network performance.
Spectrum planning should therefore be part of the initial network design.
Channel selection, frequency reuse, antenna characteristics, geographic separation, and neighboring networks can all influence performance.
6. Choosing Equipment Before Designing the Network
It can be tempting to start with a product and build the network around it.
A better approach is to define the network requirements first.
Determine the coverage area, subscriber density, required capacity, distances, frequencies, backhaul requirements, environmental conditions, and future expansion plans.
Then select equipment that fits those requirements.
7. Forgetting About Power and Protection
Outdoor network equipment has to deal with much more than bandwidth.
Power quality, grounding, lightning, surges, weather, and temperature can all affect network reliability.
Proper grounding and surge protection should be part of the network design rather than something added after installation.
The same applies to outdoor enclosures, cable management, connectors, and other physical infrastructure.
8. Underestimating Customer-Side Installation
The network doesn't end at the tower.
Customer premises equipment, antenna placement, cabling, indoor networking, and WiFi can all influence the customer's experience.
A strong connection to the tower doesn't help much if the equipment inside the customer's home or business is poorly configured.
9. Not Monitoring the Network
A wireless network should be treated as an evolving system.
Once customers are connected, operators should monitor utilization, signal performance, capacity, interference, outages, and other network metrics.
Monitoring allows problems to be identified before they become widespread service issues.
10. Trying to Do Everything With One Technology
There is no reason an operator has to use the same technology everywhere.
Some customers may be better served by one frequency band, while others may require another approach.
Some areas may make sense for FWA while others are better candidates for fiber.
A combination of technologies can often provide a more practical network than trying to force one solution into every location.
Good Wireless Networks Start With Good Planning
Fixed wireless can provide an excellent broadband solution, but the equipment itself is only part of the equation.
The best results come from looking at the entire network, from the core and backhaul to the access point and the customer's equipment.
Proper engineering, capacity planning, site selection, spectrum management, power protection, monitoring, and future expansion should all be considered before the first radio is installed.
The time spent planning the network up front can make a significant difference in how it performs once customers start using it.
Need help with your next network project? Our team of industry-seasoned engineers is here to help with WiFi and network design, product selection, pre-configuration, staging and kitting, technical support, and both wired and wireless network solutions.
Reach out to us at sales@ispsupplies.com and let’s talk about your project.