Positron Access G1002-C+ G.hn (MIMO) To Gigabit Ethernet Bridge. 802.3af (POE 15W) GigE
- SKU: G1002-C+
Product Information
Positron Access Solutions G1002-C+
G1002-C+ G.hn (MIMO) To Gigabit Ethernet Bridge. 802.3af (POE 15W) GigE, Powered From GAM
“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi-Dwelling Unit (MDU) with fiber is complex and expensive.
The G1002-C+ series of G.hn to Ethernet adapter complement the popular G1001 series with support for two (2) Gigabit Ethernet ports with one of the ports providing power to Ethernet devices as per the 802.3af / 802.3at standards (G1002-M+ and G1002-C+).
The G1002 series supports the ITU-T G.9960 G.hn Wave2 standard and is designed to operate over the existing telephone wiring (UTP, CAT-3 or CAT-5/5e) or coaxial cabling and deliver a Gigabit Internet service to each subscriber at a lower cost and without the complexity and delays associated with in-building fiber installation. G.hn is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies. With G.hn as the Access technology, Operators deliver advanced services such as Gigabit High Speed Residential Internet and 4K IPTV.
About the G1002 Series Managed Demarcation Point with POE / POE+ support
The G1002-C+ further add support on GigE port #1 for Power over Ethernet (POE or POE+) as per the IEEE 802.3at standard (30W) to devices such as Wi-Fi Access Points, IP Camera or Residential Gateways (RG).
Specifications
Specifications G1002-C+
| Dimensions | 3.7” Width x 1.35” Height x 6.7” Depth / 95 mm W x 34.3 mm H x 169.5 mm D |
| LED | Power, G.hn, Status (STA) and POE |
| Power Adapter | G1002-C+: 110-220 Vac to 48 VdC / 1A power adapter |
| Power Consumption | G1002-C+: Up to 30W in 802.3at (POE+) mode |
| Certification | CE Mark, FCC Part 15 Class B |
| Operating Temperature | 0˚C to +40 ˚C |
| Storage Temperature | -25˚C to +80 ˚C |
| Operating Humidity | 5% to 95% relative, non-condensing |
| G.hn Specification | |
| G.hn Standards (Wave-2) | Based on GigaWire Alliance specification and fully compliant with the following ITU-T standards • G.9960 Amendment 2 - System Architecture and PHY Layer • G.9961 Data Link Layer • G.9962 Management • G.9964 PSD |
| Ease of Deployment | Support G.hn operation over telephone wiring (G1002-M / G1002-M+) or coax cabling (G1002-C / G1002-C+) |
| Point-to-point support | Supports Point-to-point (twisted pair) with with G1002-M / G1002-M+ |
| Point-to-Multipoint support | Supports Point-to-Multipoint on coaxial cabling (up to 16 devices) with G1002-C / G1002-C+ |
| Ethernet Standards | IEEE 802.3, 802.3u, 802.3z, 802.1q (VLAN), 802.1ad (Q-in-Q) |
| POE Standards | G1002-M+ and G1002-C+ support IEEE 802.3af (POE up to 15.4W), 802.3at (POE+ up to 25W) |
| POE Management and control | G1002-M+ and G1002-C+ report detailed management information about the state and power consumption of the devices attached to their POE port The GAM integrates control over the POE interface and allows a power cycle to force a restart of the device attached to the POE port to assist with remote troubleshooting and problem resolution with 3rd party devices |
| Ease of Operation | Automatic firmware and configuration management via the Positron GAM |
| Encryption | AES-128 encryption with individual keys for each end-node under the control of the Positron GAM acting as the Master Node |
| Modulation and Frequency Band | Supports OFDM 200 MHz (Singe Input Single Output - SISO) on a single pair or OFDM 100 MHz (Multiple Input Multiple Output – MIMO) on two (2) pairs per port Neighbor Domain Interface Mitigation (NDIM) |
| CATV co-habitation | The G1002-C / G1002-C+ incorporate a Low-Pass Filter (LPF) to facilitate co-habitation with legacy CATV starting with Channel 30 (250 MHz) |
| Bandwidth Management | Up to 1.7 Gbps with Dynamic Bandwidth Allocation to optimize throughput based on nature of traffic flows with automatic adjustment of the upstream / downstream ratio |
| Vectoring (Copper pairs) | The G1002-M / G1002-M+ support VectorBoost™ embedded in the GAM that enables vectoring for Far-End Crosstalk (FEXT) mitigation and improved performance over Telephone wiring |
| Mitigation of Near-end Crosstalk | Near End Crosstalk (NEXT) Mitigation and support for Neighbor Domain Interface Mitigation (NDIM) |
| PSD | Programmable PSD mask for coexistence with xDSL / radio and Far End Crosstalk (FEXT) mitigation via Cloud-based VectorBoost™ vectoring |
| Reliability and Resiliency | State of the art LDPC Forward Error Correction (FEC) |