Teltonika PoE Layer 2 unmanaged switch, 5 x Gigabit Ethernet 9-30 V Power Supply
US$47.00 US$55.00
Product Information
Teltonika TSW110000010
PoE Layer 2 unmanaged switch, 5 x Gigabit Ethernet 9-30 V Power Supply
TSW110 is an unmanaged layer 2 Ethernet switch. This tiny but rugged professional device enables industrial high-bandwidth applications with a reliable data connection. It has five Gigabit Ethernet ports to connect equipment to the network and supports wide power supply voltages (9-30 V).
Features:
- GIGABIT ETHERNET: 5 x Gigabit Ethernet with speeds up to 1000 Mbps
- DURABILITY: Rugged aluminium housing
- MOUNTING: DIN rail and surface mounting options
- TEMPERATURE: Operating temperature from -40 °C to 75 °C
Specifications
Specifications TSW110000010
ETHERNET | |
ETH | 5 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover |
IEEE 802.3 series standards | 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az |
PERFORMANCE | |
Bandwidth (Non-blocking) | 10 Gbps |
Packer buffer | 128 KB |
MAC address table size | 2K entries |
POWER | |
Connector | 4-pin industrial DC power socket |
Input voltage range | 9 – 30 VDC |
PoE (passive) | Possibility to power up through ETH1 ports, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC |
Power consumption | < 0.4 W/ < 1.8 W |
PHYSICAL INTERFACES | |
Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps |
Status LEDs | 1 x Power LED, 10 x ETH status LEDs |
Power | 1 x 4-pin power connector |
Other | 1 x Grounding screw |
PHYSICAL | |
Casing material | Full aluminum housing |
Dimensions (W x H x D) | 100 x 30 x 85 mm (4" x 1.5" x 3.5" inches) |
Weight | 227 g (1 lbs) |
Mounting options | DIN rail or wall mounting (additional kit needed), flat surface placement |
OPERATING ENVIRONMENT | |
Operating temperature | -40 °C to 75 °C |
Operating humidity | 10% to 90% non-condensing |
Ingress Protection Rating | IP30 |
REGULATORY & TYPE APPROVALS | |
Regulatory | CE, UKCA, EAC, UCRF, ANRT, CITC, Kenya, FCC, IC, NOM, RCM, BSMI, CB |
EMC EMISSIONS & IMMUNITY | |
Standards | EN 55032:2015 + A11:2020 EN 61000-3-3:2013 + A1:2019 EN IEC 61000-3-2:2019 EN 55035:2017 |
ESD | EN 61000-4-2:2009 |
Radiated Immunity | EN IEC 61000-4-3:2006 + A1:2008 + A2:2010 |
EFT | EN 61000-4-4:2012 |
Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014 + A1:2017 |
CS | EN 61000-4-6:2014 |
DIP | EN 61000-4-11:2004 + A1:2017 |
Standards | IEC 62368-1:2018 EN IEC 62368-1:2020+A11:2020 |