Ubiquiti Ceiling Mount for UVC-G3-Flex Camera (3-pack)
US$54.95
Product Information
Ubiquiti UVC-G3-F-C-3 (3-Pack)
Ceiling Mount for UVC-G3-FLEX Camera
Note: Camera not included.
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security.
Features:
- Low-profile installation
- Requires 2 1/8" inch cutout
- Includes drywall mounting anchors
- Includes retainer for ceiling tile mount
- Optional security screw locks camera to mount
Specifications
Specifications UVC-G3-F-C-3
| Dimensions | Ø 107.5 x 48 x 48 mm (Ø 4.23 x 1.89 x 1.89") |
| Weight | 170 g (5.99 oz) |
| Sensor | 1/2.7" 2-Megapixel HDR Sensor |
| Lens | EFL 4mm / f2.0 |
| Viewing Angle with Lens Distortion Correction (LDC) LDC Off LDC On | 87.4° (H), 47° (V), 104° (D) 80° (H), 46° (V), 92° (D) |
| Night Mode | IR LEDs with Mechanical ICR Filter |
| Video Compression | H.264 |
| Resolution | 1080p FHD (1920 x 1080) |
| Maximum Frame Rate | 25 FPS |
| Image Settings | Brightness, Contrast, Sharpness, Saturation, Noise Reduction, 50/60 Hz |
| Microphone | Yes |
| Management Interface | UniFi Protect; UniFi Video |
| Networking Interface | (1) 10/100 Ethernet Port |
| Max. Power Consumption | 4W |
| Power Method | 802.3af PoE |
| Power Supply | 802.3af PoE Switch Port |
| Mounting Table, Wall | (Indoor/Outdoor), Pole |
| Operating Temperature | -20 to 50° C (-4 to 122° F) |
| Operating Humidity | 20 to 90% Noncondensing |