WiFi Texas Gigabit 4 port PoE Injector with 56 volt 120 watt power supply
|Data + PoE Ports||4|
|Max Amps Per Kit||2 Amps|
|Max Power for Kit||120Watts|
|Max. Amps Per Port||550 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||56 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)|
|Power Input||2.1mm DC|
WiFi Texas WT-AT-4-56V120W
Gigabit 4 port PoE Injector with 56 volt 120 watt power supply
Use these 56 volt Power over Ethernet (PoE) devices with high-powered Access Points and PTZ cameras. These fully 802.3at compliant injectors work with Cisco products and any other IP cameras, VOIP phones, WiFi access points required 802.3at or 802.3af PoE.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Active PoE means the right power at the right time . An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected.