Positron Access G.hn Access Multiplexer GAM with 24-dual pair MIMO copper 2x 10Gbps SFP+ Ports
|10 GigE SFP+||2|
|G.hn Ports / Type||24 MIMO (RJ14)|
|Out-of-band Management Ports||1 x 10/100/1000BaseT, 1 x serial|
|Dimensions||17.4” Width x 1.73” Height x 10.0” Depth / 442 mm W x 44 mm H x 254 mm D|
|Power Source||100-240 Vac / 50~60 Hz|
|Certification||CE Mark, FCC Part 15 Class A|
|perating Temperature||0ºC to 45ºC|
|Storage Temperature||0ºC to 45ºC|
|Operating Humidity||10% to 90% relative, non-condensing|
Positron Access Solutions GAM-24-M
G.hn Access Multiplexer GAM with 24-dual pair MIMO copper 2x 10Gbps SFP+ Ports
“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi-Dwelling Units (MDUs) with fiber is complex and expensive. With the G.hn Aggregation Multiplexer (GAM), positron Access addresses the key challenge of delivering Gigabit Internet access to subscribers in MDUs as well as dense Single Family Unit (SFU) homes by leveraging the existing telephone or coaxial infrastructure to deliver near symmetrical Gigabit services at a fraction of the cost of alternatives.
The ITU-T G.9960 G.hn Wave-2 standard is designed to leverage the existing telephone wiring, (UTP, CAT-3 or CAT-5/5e) or RG-6/RG-59 coax cabling to deliver a Gigabit Internet service to each subscriber without the cost, complexity and delays associated with in-building fiber installation. G.hn is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies.
With G.hn, Operators deliver advanced services such as Gigabit High Speed Residential Internet and 4K IPTV without the high capital and operational expenses associated with a fiber retrofit. Each G.hn subscriber port supports up to 1.7 Gbps of dynamically allocated bandwidth for near symmetrical Gigabit services over the existing telephone wire or coaxial cable. The Positron GAM solution is MEF CE 2.0 compliant and is ideally suited to deliver Business Ethernet services in an MDU and/or MTU deployment.
- SFP+ offer versatile support for Active Ethernet and for GEPON, 10GEPON, NG-PON2 and XGS-PON via external ONU/ONT devices; Also compatible with 3rd party PON SFP ONT modules