FS 10GBASE-SR SFP+ 850nm 300m DOM LC MMF Transceiver Module for FS Switches
Product Information
FS.Com SFP-10GSR-85
10GBASE-SR SFP+ 850nm 300m DOM LC MMF Transceiver Module for FS Switches
Cisco SFP-10G-SR compatible SFP+ transceiver supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.
Quality Certifications
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
High Performance:
- Low power consumption ≤0.6W, saving power
- 50ms typical latency, MTBF over 1 million hours
- -5℃~70℃ operating temperature
- Stainless steel material, anti-corrosion and salt spray resistance
Wide Application:
- Fully compatible with almost all Cisco devices
- Widely used on 10G switches, routers, servers, NICs and other transmission equipment
- Suitable for data center, enterprise wiring closet, radio & baseband unit and other environments
Protocols and Safety Standards:
- IEC60825-1 Class 1 laser safety compliant
- Class B EMC, IEC 61000-4-2 Anti Electro-Static Discharge and IEC61000-4-3 Radiation Resistant
- Compliant with IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA, CPRI, eCPRI
Features:
- VCSEL+PIN, Low Power Consumption ≤0.6W (Typical)
- Fully Compatible with 200+ Vendors
- EMC Support, Anti Electro-Static Discharge and Radiation Resistant
- Hot Pluggable SFP+ MSA Compliant
- FS BOX - Support Real-time Encoding
- Class 1 Laser Safety
Specifications
Specifications SFP-10GSR-85
| Cisco Compatible | SFP-10G-SR |
| Form Factor | SFP+ |
| Max Data Rate | 10.3125Gbps |
| Wavelength | 850nm |
| Max Cable Distance | 300m@OM3/400m@OM4 |
| Connector | LC Duplex |
| Media | MMF |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| DDM/DOMSupported | Commercial |
| Temperature Range | -5 to 70°C (23 to 158°F) |
| TX Power | -7.3~-1dBm |
| Receiver Sensitivity | < -11.1dBm |
| Typical Power Consumption | ≤0.6W |
| Receiver Overload | 0.5dBm |
| Bit Error Ratio (BER) | 1E-12 |
| Extinction Ratio | >3dB |
| EMC (Electro Magnetic Compatibility) | Supported |
| MTBF | 1,000,000 Hours |
| Protocols | IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI |
| Warranty | 5 Years |
| Weight | 0.075 lbs |
| Dimensions (W x D x H) | 0.52" × 2.22" × 0.33" in |