ICT Site Converter 20-60VDC to 12VDC 70 Amp Isolated Converter 19" Rack Mount
- SKU: ICT206012-70AI2
Product Information
ICT 206012-70AI2
Site Converter 20-60VDC to 12VDC 70 Amp Isolated Converter 19" Rack Mount
The ICT Site Converter Series are high current, high efficiency rack mount DC to DC converters designed for dual-voltage site applications where a 24 or 48 volt DC input needs to be converted to a 12 or 24 volt DC output to power two-way radios, repeaters, RF amplifiers, trunking systems, or other sensitive electronic equipment. The wide-ranging input is 20 to 60 volts DC, so the ICT Site Converter will support a variety of input voltages. There are four models available to support peak current of 35 or 50 Amps at 24 volt output and 70 or 100 Amps at 12 volt output. Efficiency is 90%, meaning less energy will be lost in the conversion process.
The ICT Site Converter is fully isolated, and can be used in positive or negative ground environments. The wide-ranging input voltage is also ideal for sites where the DC voltage may fluctuate. The ICT Site Converter's built-in protection features protect the converter as well as the connected loads from abnormalities.
Output voltage is adjustable using a front-mounted trim pot. A remote alarm contact will signal when DC fails or the converter shuts down. A remote contact terminal allows the converter to be shut down remotely for servicing or to conserve the battery when not in use.
Features:
- Designed for dual-voltage site applications
- Ideal for sensitive electronic equipment like two-way radios, repeaters, RF amplifiers, trunking systems.
- 90% conversion efficiency
- Converts 20-60 volts DC input to 24 or 12 volts DC output
- 24 volt output models for 35A and 50A, 12 volt models for 70A and 100A
- Fully isolated design for positive or negative ground installations
- 2RU 19 inch rack mount chassis with adjustable mounting position
- Adjustable output voltage trim
- Front panel power switch
- Remote alarm and remote shutdown contacts
- 2 year warranty
- –30 to +60 °C operating temperature range
Specifications
Specifications
Input Voltage Range | 20-60 VDC |
Output Voltage Range | 12.5-14.5 VDCa) +/- 300 mV |
Output Current (Cont.) | 64 Amps |
Output Current (Peak) | 70 Amps |
Current Limiting | 74 Amps +/- 5% |
Line Regulation | 0.005 |
Load Regulation | 0.03 |
Output Ripple (Max) | 20mV RMS |
Efficiency (Typical) | 0.9 |
Input Current @ Vin(min) | 55 Amps |
Operating Temperature Range d) | -30OC to +60OC |
Weight | 18 lbs |
Dimensions (L x W x H) | 19"W x 12.33"L x 3.47"H (2U) |