KP Performance 3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 14 dBi gain, Ruggedized, 2 X N Female Connectors
- SKU: KP-3DPFP14
- Manufacturer: KP Performance
- Data Sheet: Download
Product Information
KP Performance KP-3DPFP14
3300 MHz to 4200 MHz VH Dual Polarization Flat Panel, 14 dBi gain, Ruggedized, 2 X N Female Connectors
The KP-3DPFP14 from KP Performance Antennas is a high performance flat panel antenna engineered for superior performance antenna specifically designed for rugged environments with a low profile aesthetically pleasing design. The KP-3DPFP14 operates from 3300 to 4200 MHz which is ideal for Point to Point applications where form factor is a concern and coverage of extended CBRS is necessary. The KP Performance Antennas KP-3DPFP14 antenna has 14 dBi gain with 45° Horizontal Beamwidth and 40° Vertical Beamwidth polarization.
The 45° Horizontal Beamwidth and 40° Vertical Beamwidth antenna with Vertical + Horizontal polarization KP-3DPFP14 from KP Performance Antennas has 2 x Type N Female connectors and 14 dBi of gain. The 3500-4200 MHz KP-3DPFP14 can be used with APs and Routers with 1 or 2 antenna ports. This antenna incorporates advanced dual polarization technology that allows for the interoperability of two radios transmit and receive paths. This technology allows for the attenuation of unwanted signals from adjacent channels and/or co-located equipment.
The 2 x Type N Female connectorized KP-3DPFP14 antenna from KP Performance Antennas excels in large open areas such as indoor courtyards, indoor sporting venues, convention centers and shopping malls. The mounting bracket and hardware are included for easy installation. Our expert technical support and friendly, knowledgeable customer service personnel are available to assist you with your particular needs for high performance flat panel antenna engineered for superior performance antennas.
Features:
- Dual Polarity feed system in single enclosure
- Includes tilt and swivel mast mounting
- Two integral N - Female connectors
- UV - resistant radome for all weather operation
- MIMO - Multiple - Input and Multiple - Output
Applications:
- 3.5 GHz Band Applications
- SOFDMA
- CBRS and Extended CBRS
- Wireless Internet Provider " cell " sites
- Wireless LAN systems & IEEE 802.16e Applications
Specifications
Specifications KP-3DPFP14
Frequency Range | 3300 MHz to 4200 MHz |
Polarization Type | Dual H/V |
Gain | 14 dBi |
Vertical Beamwidth | 35° |
Horizontal Beamwidth | 40° |
Electrical Downtilt | 0° |
F/B Ratio | 25 dB |
VSWR | 02:01 |
Port to Port Isolation | 25 dB |
Impedance | 50 |
Connector Type | 2x N-Type Female |
Weight | 3.96 lbs |
Dimension | 7.4" L x 2.1" W x 7.4" H |
Mounting Mast Diameter | 1.57 to 1.97 inch |