MikroTik RouterBOARD SXT 4G kit with enclosure RouterOS L3
|CPU||QCA9531 650 MHz|
|Size of RAM||64 MB|
|Storage||16 MB Flash|
|10/100 Ethernet ports||2|
|LTE antenna gain||10.5 dBi|
|Antenna beam width||60°|
|LTE category||4 (150Mbps Downlink, 50Mbps Uplink)|
|SIM slot||2 (Micro SIM)|
|PoE in||Yes, on Ether1|
|PoE out||Yes, on Ether2, max out per port output (input < 30 V): 600 mA, max out per port output (input > 30 V): 400 mA max total out (A): 600 mA|
|Supported input voltage||18 - 57 V (Passive PoE, 802.3af/at on Ether2)|
|Dimensions||140 x 140 x 103 mm|
|Operating temperature||-40°C .. +60°C tested|
|Max Power consumption||6 W|
|LTE (FDD) bands||3/7/20/31 (1800/2600/800/450)|
|LTE (TDD) bands||41n/42/43 (2500/3500/3700)|
MikroTik RouterBOARD RBSXTR&R11e-4G
MikroTik SXT 4G kit with enclosure RouterOS L3
SXT 4G kit (RBSXTR&R11e-4G) includes LTE modem that supports LTE FDD bands 3 (1800MHz), 7 (2600MHz), 20 (800MHz) and 31 (450MHz), as well as LTE TDD bands 41n (2500MHz), 42 (3500MHz) and 43 (3700MHz).
The SXT LTE kit is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.
In comparison with our first generation model RBSXTLTE3-7, the SXT LTE kit is powered by faster CPU and supports not only LTE with more speeds, but also 2G (international model only) and 3G, as well as much wider band range. The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.
The device has a built in high quality Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link.