• Home
  • MikroTik SXT LTE kit with enclosure

MikroTik SXT LTE kit with enclosure

(0) No Reviews yet
  • SKU: RBSXTR&R11e-LTE-US
  • Manufacturer: MikroTik
  • Data Sheet: Download
  • Quick Guide: Download
  • Block Diagram: Download
  • Availability: Please Contact Us for AvailabilityEmail me when this product is in stock!
$129.00

Specifications RBSXTR&R11e-LTE-US

Product code RBSXTR&R11e-LTE-US
CPU QCA9531 650 MHz
Size of RAM 64 MB
Storage 16 MB Flash
10/100 Ethernet ports 2
LTE antenna gain 9 dBi
Antenna beam width 60°
LTE category 4 (150Mbps Downlink, 50Mbps Uplink)
3G category R8 (Cat24 - 42.2Mbps Downlink) R7 (Cat14 - 21.1Mbps Downlink)
2G category Class12 -
SIM slot 2 (Micro SIM)
PoE in Yes, on Ether1
PoE out Yes, on Ether2, max out per port output (input < 30 V): 600 mA, max out per port output (input > 30 V): 400 mA max total out (A): 600 mA
Supported input voltage 18 - 57 V (Passive PoE, 802.3af/at on Ether2)
Dimensions 140 x 140 x 103 mm
Operating temperature -40°C .. +60°C tested
License level 3
Operating System RouterOS
Max Power consumption 6 W
Supported BandsRBSXTR&R11e-LTE-US
LTE (FDD) bands 2(1900)/4(1700)/5(850)/12(700)
3G bands 2(1900)/5(850)
Although many have successfully used these devices on various US Carrier networks, these devices are not certified on any US Cellular Carrier Networks. The buyer and user assume all risks for using them on carrier networks including the possibility you may not get them to work or that the carrier may decide to ban the use of the device on their network without recourse.

MikroTik RouterBOARD RBSXTR&R11e-LTE-US (US Version)

MikroTik SXT LTE kit with enclosure RouterOS L3

These products will not work on Verizon’s US network outside large metro areas because they do not run Band 13. They are also not certified on Verizon so use them at your own risk. Check with your cellular provider before using on that carrier’s network.

The SXT LTE kit (product code RBSXTR&R11e-LTE-US) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant

The device has a built in high quality 3G/4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link.

Ratings & Reviews

No reviews available

Be the first to Write a Review