MikroTik RBwAPR-2nD wAP R 2dBi 2.4GHz Weatherproof Wireless Access Point
|10/100 Ethernet ports||1|
|Antenna gain dBi for 2.4 GHz||2|
|CPU core count||1|
|CPU nominal frequency||650 MHz|
|DC jack||9-30 V|
|Max Power consumption||6W|
|Number of chains||2|
|PCB temperature monitor||Yes|
|PoE in||Passive PoE|
|Size of RAM||64 MB|
|Storage size||16 MB|
|Tested ambient temperature||-40°C .. +60°C|
|Wireless 2.4 GHz chip model||QCA9531|
|Wireless 2.4 GHz standards||802.11b/g/n|
|2.4 GHz||Transmit power (dBm)||Receive Sensitivity||Transmit power (mW)|
MikroTik RouterBOARD RBwAPR-2nD
wAP R 2dBi 2.4GHz Weatherproof Wireless Access Point
These products will not work on Verizon’s US network outside large metro areas because they do not run Band 13. They are also not certified on Verizon so use them at your own risk. Check with your cellular provider before using on that carrier’s network.
The wAP R is a small weatherproof 2.4Ghz wireless access point with a miniPCI-e slot (so you can use your own LTE card) and LTE antennas. Unit comes with one 10/100 Ethernet LAN port for your wired devices.
The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window.
Unit has the several powering options - 9-30V PoE-in by Ethernet port, DC jack and automotive connector, very handy in mobile devices like car, bus or train.