• Home
  • Tripp Lite 1250W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets

Tripp Lite 1250W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets

(0)No Reviews yet
  • SKU: TRPI01K
  • Manufacturer: Tripp Lite
  • Data Sheet: Download
13 in stock
College Station
13 In stock

Product Information

Tripp Lite TRPI01K

1250W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets

Utilize you vehicle's battery to efficiently power work site power tools, pumps, as well as your laptop computer. Continuously supplies 1250 watts of 120VAC power to (2) AC outlets from any 12VDC battery source. Frequency control locks AC output at 60Hz for operating stability of motor loads and other inductive loads with high current startup requirements.

NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18" from the PV1250FC's battery in the positive line.


Features:

  • Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
  • Converts 12V DC battery power to 120V AC power
  • 1,250 watts continuous output power
  • Peak output power: OverPower (up to 1 hour) - 1875 watts, Double-Boost (up to 10 seconds) - 2500 watts
  • 2 outlets; DC input terminals for 12V battery connection
  • Frequency control for operating stability
  • High-efficiency operation conserves batteries to prolong run time
  • Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
  • DC fusing protects inverter against overload
  • RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
  • Automatic overload shutdown
  • Ignition interlock jack

Specifications

Specifications TRPI01K

INPUT
Recommended Electrical ServiceRequires 12V DC input source capable of delivering 127A for the required duration (when used at full capacity)
Maximum Input Amps / WattsFull continuous load - 127A at 12V DC, No load - 2.2A at 12V DC
Input Connection TypeSet of 2 DC input terminals
Input Cord Length DetailsUser supplies cabling. 4 gauge or larger recommended.
Voltage Compatibility (VDC)12
OUTPUT
Frequency Compatibility60 Hz
Pure Sine Wave OutputNo
Output (Watts)1250
Nominal Output Voltage(s) Supported120V
Output Receptacles (2)5-15R
Continuous Output Capacity (Watts)1250
Peak Output Capacity (Watts)2500
Output Voltage RegulationMaintains PWM sine wave output voltage of 120 V AC (+/-5%)
Output Frequency Regulation60 Hz (+/- 0.3 Hz)
Overload ProtectionCircuit breaker
BATTERY
DC System Voltage (VDC)12
PHYSICAL
Cooling MethodFan
Form Factors SupportedMounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Material of ConstructionPolycarbonate
Shipping Dimensions (hwd / cm)31.75 x 26.42 x 26.42
Shipping Dimensions (hwd / in.)12.50 x 10.40 x 10.40
Shipping Weight (kg)10.21
Shipping Weight (lbs.)22.50
Unit Dimensions (hwd / cm)17.78 x 22.23 x 22.86
Unit Dimensions (hwd / in.)7 x 8.75 x 9
Unit Weight (kg)10.52
Unit Weight (lbs.)23.2
ENVIRONMENTAL
Relative Humidity0-95% non-condensing
WARRANTY
Product Warranty Period (Worldwide)1-year limited warranty

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review