RF Elements Passive PoE Injector V2
- SKU: POEINJv2
Product Information
RF Elements POEINJv2
RF Elements Passive PoE Injector V2
Authentic Power Over Ethernet
Passive PoETM (Power over Ethernet) is a simple way of providing power to an access point through an ethernet cable. Passive PoETM uses free wires in the ethernet cable to send the equipment's power along them to the other end.
PassivePoETM is our original solution. Avoid using low-cost or anonymous copies in order to avoid the risk of damaging your device. We deliver Injector only or Whole Set, both using standard 5.5×2.1 mm DC power jack.
How It Works
The complete Passive PoETM set contains two pieces: an injector and a splitter. It is designed for products that do not support Power Over Ethernet by default. Passive PoETM set can be used with a wide range of network products such as access points, routers, IP cameras, modems, switches, or embedded computers.
The range of Passive PoETM usually reaches 30-40 metres (100-130 ft) but the actual distance depeneds on the power supply or the device, among others. Passive PoETM can be used with the power adaptor commonly supplied with the network device.Panel Installation
Our Passive PoETM can be easily integrated into the face plate of your network device. Create a cutout in the plate as depicted below, and simply insert and turn the cable.
Specifications
Specifications POEINJv2
Weight | 0.06 Kg / 0.13 lbs. – single set incl. package 14.5 Kg / 31.9 lbs. – carton (400 pcs) |
Single Unit | Plastic Bag: 31 × 10 × 1.2 cm |
200 Units | Carton Box: 46 × 30 × 25 cm |
Product ID | POEINJv2 |