ROHN 25GWM Tower Wall Mount Bracket Kit

ROHN 25GWM Tower Wall Mount Bracket Kit

The ROHN 25GWM allows you to wall mount the base of a bracketed 25G tower. This wall mount gives you the ability to install more load than is typically available on a standard wall mount. The wall mount also helps to keep the ground area around the tower location usable. The R-25GWM assembly comes complete with both top and bottom wall mounting bracket materials and stub leg base plate for connection to a standard ROHN 25G tower section.

• 1. It is the purchaser’s responsibility to verify that their installation and building structure are able to withstand all loads imposed by the antenna system and mount.
• 2. All antenna installations should be grounded, by installer, to meet all applicable codes.
• 3. All parts are hot-dip galvanized after fabrication.
• 4. All sealant to be supplied by others, if required.
• 5. Local zoning, building codes and insurance companies may require an architect or structural engineer’s approval prior to installation.
• 6. Inspect the mount and antenna installation every 6 months and after severe weather.
• 7. Holes provided in mounting angles are 11/16” diameter for use with HDG 5/8“ threaded rod, provided by others.