MikroTik PL6411-2nD PWR-Line AP 1.5dBi, 2.4GHz 802.11b/g/n, dual-chain RouterOS L4 - US Version
|CPU nominal frequency||650 MHz|
|Size of RAM||64 MB|
|Memory||16 MB Flash|
|10/100 Ethernet ports||1|
|Wireless||Built-in 2.4 GHz 802.11b/g/n, dual-chain|
|Wireless regulations||Specific frequency range may be limited by country regulations|
|Antenna gain||1.5 dBi|
|Antenna beam width||360°|
|Wireless chip model||QCA9533|
|Supported input voltage||100 V - 240 V|
|Dimensions||50 x 68 x 33mm|
|Operating temperature||-20°C .. +60°C|
|Max power consumption||7 W|
|Power plug type||Type A (commonly used in USA, Canada, Mexico, Thailand)|
|RATE||Tx (dBm)||Rx (dBm)|
MikroTik RouterBOARD PL6411-2nD PWR-Line AP (US Version)
Powerline Access Point 650MHz CPU, 64MB RAM, 2.4 GHz 802.11b/g/n, dual-chain, RouterOS L4
The PWR-LINE AP is a wireless access point with a single Ethernet port, a built-in 802.11b/g/n WiFi radio and capability to connect to other PWR-LINE devices through the electrical lines in your premises.
Since the device runs the same software as all other MikroTik products, it opens up a wide array of functions, all made possible with the extensive feature set present in RouterOS.
You either use the default configuration, which allows hassle free and quick installation, or dive into the rich configuration options, set firewall, usage limitations, make virtual access points for guests and more. When using multiple PWR Line AP devices in your network, you can even manage them all with the CAPsMAN access point manager feature, which can be run on your main MikroTik router.
An example of usage
The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach.
Especially useful in homes with thick walls, where you can extend Wi-Fi coverage to those rooms, where signal is poor, without having to re-wire your house.
Simply plug this device directly into one of the LAN ports of your MikroTik router, and add another one somewhere further in your premises. They will link together through the power lines. You can install up to eight PWR-LINE devices to further build your network.