• Home
  • PWR-Line AP 2-Pack (US Version)

PWR-Line AP 2-Pack (US Version)

(0) No Reviews yet
  • SKU: PL6411-2nD-2PACK
  • Manufacturer: MikroTik
  • Data Sheet: Download
  • User Guide: Download
  • Availability: 114 In Stock (updated live)
$79.99 $84.00

PWRLINE-AP 2-pack

Specifications PL6411-2nD

CPU QCA9533
CPU nominal frequency 650 MHz
PLC chipset QCA6410
Size of RAM 64 MB
Memory 16 MB Flash
10/100 Ethernet ports 1
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
Wireless regulations Specific frequency range may be limited by country regulations
Antenna gain 1.5 dBi
Antenna beam width 360°
Wireless chip model QCA9533
Supported input voltage 100 V - 240 V
Dimensions 50 x 68 x 33mm
Operating temperature -20°C .. +60°C
License level 4
Operating system RouterOS
Max power consumption 7 W
Power plug type Type A (commonly used in USA, Canada, Mexico, Thailand)

Wireless specifications
RATE Tx (dBm) Rx (dBm)
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71

MikroTik RouterBOARD PL6411-2nD PWR-Line AP US Version 2-Pack

Powerline Access Point 650MHz CPU, 64MB RAM, 2.4 GHz 802.11b/g/n, dual-chain, RouterOS L4

The PWR-LINE AP is a wireless access point with a single Ethernet port, a built-in 802.11b/g/n WiFi radio and capability to connect to other PWR-LINE devices through the electrical lines in your premises.

Since the device runs the same software as all other MikroTik products, it opens up a wide array of functions, all made possible with the extensive feature set present in RouterOS.

You either use the default configuration, which allows hassle free and quick installation, or dive into the rich configuration options, set firewall, usage limitations, make virtual access points for guests and more. When using multiple PWR Line AP devices in your network, you can even manage them all with the CAPsMAN access point manager feature, which can be run on your main MikroTik router.

An example of usage

The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach.

Especially useful in homes with thick walls, where you can extend Wi-Fi coverage to those rooms, where signal is poor, without having to re-wire your house.

Simply plug this device directly into one of the LAN ports of your MikroTik router, and add another one somewhere further in your premises. They will link together through the power lines. You can install up to eight PWR-LINE devices to further build your network.

Ratings & Reviews

No reviews available

Be the first to Write a Review