Tycon Power 9-36VDC IN 24VDC OUT, 19W DC to DC Conv.
|DC input voltage||9VDC – 36VDC|
|DC input connector||Removable screw type compression wire terminal (12 AWG max)|
|DC output voltage||24V (passive)|
|Data in & data/PoE output connector||RJ45 (shielded)|
|Output current (max)||0.8A|
|Output power (max)||19W|
|Self consumption power||1W|
|Storage temperature||-40 to +80°C (-40 to +176°F)|
Tycon Power TP-DCDC-1224G
DC to DC Converter / POE Inserter
DC Input Voltage: 9VDC - 36VDC
DC Output Voltage: 24V (Passive)
Output Current (max): 0.8A
Output Power (max): 19W
The TP-DCDC Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 18V to 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. They have an integrated POE injector to apply the 48VDC to the CAT5 Ethernet cable. The output is regulated 18V, 24V or 48VDC from an input voltage between 9VDC and 36VDC. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). An IEEE 802.3af compliant model is available for those applications requiring 802.3af handshake.
They have various protections for surge, short circuit and overload. The units have power output up to 24W.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.